Proper installation
•
Place the main unit on a flat surface.
•
The remote sensor should be securely mounted
vertically to a surface.
•
Transmissions between receiver and transmitter
can be reached up to 70m apart in open areas.
Open areas refers to areas with no interfering
obstacles such as buildings, trees, vehicles, high
voltage lines, etc. voltage lines, etc.
Powering up the weather station
Remove the battery compartment door and insert 3
AAA size batteries.
Powering up the outdoor sensor
Open battery cover, and insert 2 x AA batteries
observing polarity [ “+” and “–“ marks]
Getting started
EN
To Next Page
Loading...
