For more information visit www.marcobeveragesystems.com
SANITISATION
ACCESSORIES
Sanitisation Kit: Internal Water Cooler Sanitising Solution 1L + Chiller Best Service Cartridge 8000900
Internal Water Cooler Sanitising Solution 1L 8800125
Scaleclean 1kg Descaler (5 uses) 8000260
Chiller Best Service Cartridge 8000522
Scaleclean 200g Descaler (1 use) 8000270
50
45
40
35
30
25
20
15
10
5
0
Output Temp 3°C
Output Temp 5°C Output Temp 7°C
1510 20 25 28 30 35 40
FRIIA OUTPUT VOLUME
Based on flow rate of 1.4L/min and ambient temperature of 20-25°C. Chart indicates FRIIA
chilling capacity based on incoming water temperature and desired output water temperate.
INCOMING TEMPERATURE (°C)
OUTPUT VOLUME (L/H)
> Wipe down font daily with non-abrasive cleaner.
> Sanitise the system every 6 months, after a filter change or after a period of inactivity (more than 72 hours)
HOW TO
CLEAN FRIIA
> We recommend use of both HOT (scale reducing filter if limescale is present) and COLD (carbon
block for taste and odour) water filters for FRIIA. Please contact us for advice on the best water filter.
> Descale the MIX boiler if scale is present in the water.
MAINTENANCE
FRIIA PERFORMANCE AND MAINTENANCE
To Next Page
Loading...
