14
Technical Hotline
For all your technical queries:
Technical Hotline UK: +44 (0) 1302 893 253
Technical Hotline Germany: +49 (0) 7741 966 720
Technical Hotline Switzerland: +41 (0) 41 630 25 43
WARNING
-
Read all safety warnings designated by the symbol and
all instructions.
Failure to follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Torque limiting clutch
The DDM3 - 230 is equipped with a torque-limiting clutch that reduces the maximum
torque reaction transmitted to the operator in case of jamming of a core bit. This feature
also prevents the gearing and electric motor from stalling. The torque-limiting clutch has
been factory-set.
CE-Declaration of conformity
Marcrist declares that the DDM3 - 230 Drilling Machine conforms to all current
standards and directives EN60745-1: 2009, EN60745-2-1/A12:2009, EN55014-1:
2006, EN55014-2/A1: 2001, EN61000-3-2: 2006, EN61000-3-11: 2000,
2006/42/EC, 2006/95/EC, 2004/108/EC. A detailed certificate of conformity is
available upon request.
Recycling
According to WEEE directive 2002/96/EC, old machinery should be returned
for recycling or safe disposal when they eventually become to be thrown away
(see symbol on nameplate of the drill). Separate collection of used products and
packaging allows materials to be recycled and used again. Re-use of recycled materials
helps prevent environmental pollution and reduces the demand for raw materials.
Ensure that the old tool is returned to Marcrist International Ltd and does not end up in
unsorted municipal solid waste.
To Next Page
