5
DDM3 – 230 Safety Warnings & Information
Observe Safety Instructions
When using the DDM3 - 230 observe the safety regulations applicable to your country
to reduce the risk of fire, electric shock and personal injury.
Read the safety instructions before attempting to operate the DDM3 - 230. Save
all warnings and instructions for future reference.
Operational Safety
• The DDM3 - 230 is a professional drilling machine capable of drilling up to 200mm
diameter and its internal clutch is calibrated to accommodate this.
• When drilling, at all times, care must be taken.
• Please study carefully the safety instructions and the training manual.
• Make sure that everybody who works with the DDM3 - 230 gets properly instructed to
the machine and its instructions prior to use.
• Assess the work area and employ measures to minimise any risks to you or other
persons.
• Always ensure you are working safely and within current legislation and regulations.
Additional information
The vibration emission during actual use of the power tool can differ from
the declared total value depending on the ways in which the tool is used.
Avoid vibration risk. Wear gloves during operation. Limit operating time &
shorten trigger time.
Wear ear protectors when impact drilling.
Exposure to noise can cause hearing loss
Use auxiliary handle, if supplied with the tool.
Loss of control can cause
personal injury.
Hold the power tool by an insulated handle when performing an operation
where the cutting accessory may contact hidden wiring or its own cord.
The
Cutting accessory contacting a “live” wire may make the exposed metal parts of the power
tool “live” and could give the operator an electric shock
.
To Next Page
Loading...