6
• Always wear eye protection, ear protection, dust mask and safety boots.
• Hold the DDM3 - 230 firmly with both hands.
• Always be aware that if the core bit jams the drill may rotate before the clutch
engages.
• Never drill from a position where you are not in full control of the DDM3 - 230.
• If drilling above chest height, work platforms should be used.
• Never drill from a ladder.
• Try to avoid continuous operation and consider a break once in a while. Stop working
immediately if you notice a tingle in your hands.
Above points are to be observed at any time. Failing to comply may
result in serious damage or endanger your health. If there are any
questions or queries, please contact your dealer.
To Next Page
Loading...
