EasyManua.ls Logo

Mardave V12-CE - Quick Setup

Mardave V12-CE
12 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
V12-CE SETUP MANUAL
FRONT:
JAP Medium, Jap 38, Contact 32’ or 35’ shore tires trued to 47mm diameter (inside and outside edges
well rounded off), 6mm wide inside edge additive.
Silver ‘Medium’ spring
Zero degrees toe in/out
3.2mm ride height
5th, central plate screw done up with only very light tension (approx 1.5’ camber)
1.0mm castor shims added under front end of wishbone plate.
QUICK SETUP
FRONT:
UFRA Pink Medium or Contact 32 shore tires trued to around 49mm diameter (edges well rounded again)
and full width additive
Silver ‘Medium’ springs
20,000 – 30,000wt damper oil
Diff set to medium
Motor spaced 4mm away from motor pod
3.2mm ride height
Gearing on 1s LiPo / 13.5t motor (HPI Flux) – 54-56mm/rev
THANKS GOES OUT TO JAMES GARRETT, JOHN PARKER & OTHERS. HAPPY RACING!
© 2012 MARDAVE. ALL RIGHTS RESERVED.
CALL MARDAVE: 01953 861134
MARDAVE, TURNPIKE HOUSE, THE TURNPIKE,
CARLETON RODE, NORWICH, NR16 1NL,
UNITED KINGDOM