●FAQ
*Do not expose this device to overcooling or overheated conditions for a long time,
otherwise it will cause permanent damage.
*Why can’t wear watch when taking a hot bath?
As bath water temperature is high, it will generate mass steam which is in gaseous
phase and characterized by small molecule radius. It is easy to penetrate through
watch housing gap. When temperature lowers, it will become liquid phase water drop,
which is easy to cause short circuit in the watch, resulting in damaged circuit board
and watch.
*The watch can’t start up or charge
If the newly received watch can’t start up, it may be the reason that the battery is
under protection due to collision during watch transportation. Plug in charging cable
to activate the watch.
If your watch can’t start up due to too low battery or the watch has not been used for a
long time, please plug in USB cable and charge for half an hour for activation.
To Previous Page
Loading...