marinco 10105 - Tools Required for Installation

www.marinco.com | 800.307.6702
Single Trumpet Mini Air Horn
10105 & 10123
2
Required For Installation and Not Included With This Horn:
• #10 Size Pan-head Mounting Screws (2)
• 8mm Bolt (1) or 1/4” Pan-Head Screws (2) (For Compressor Mounting)
• 1/4” Female Quick-Connect Tabs (2)
• Horn Button Rated For 20 Amps
• 20 Amp Fuse & Fuse Carrier
• Red Stranded Wire (For Positive)*
• Black Stranded Wire (For Negative)*
* See Wiring Chart For Wire Size
Tools Required for Installation:
• Phillips-Head Screwdriver
• 7/16” Drill Bit
• Electric Drill
• Soldering Gun & Solder (Optional)
• Crimping/Cutting Pliers
• Silicone Sealant
If any hardware components are missing, please contact Marinco Customer
Service at 1-800-307-6702.