To Next PageTo Next Page
Need help?Do you have a question about the Maritime Geothermal nordic dx-45 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| Model | Nordic DX-45 |
| Refrigerant | R410A |
| Compressor Type | Scroll |
| COP | 4.5 |
| Heating Capacity | 45, 000 BTU/h |
| Cooling Capacity | 42, 000 BTU/hr |
| Water Flow Rate | 11 GPM |
| Max Current | 30 A |
| Sound Pressure Level | 52 dB(A) |
| Operating Temperature Range (Cooling) | 40-120°F |
Details for planning and installing horizontal ground loop systems for DX heat pumps.
Highlights the key benefits of Direct Expansion (DX) technology compared to conventional systems.
Explains the reliability benefits of DX technology compared to conventional systems.
Details the efficiency gains achieved by DX technology in heat transfer.
Steps for properly vacuuming the system to remove moisture and air before charging.
Procedures for accurately charging the system with the correct amount of refrigerant.
Troubleshooting steps for issues related to the compressor failing to operate.
Diagnosing and resolving problems causing the compressor to cycle on and off frequently.
Addressing issues causing the unit to trip due to low suction pressure during heating.
Troubleshooting steps for scenarios with insufficient or no cooling output from the unit.
Identifying and resolving problems related to the heat pump not producing enough hot water.
