Series DC Digital Controllers
Thank you!
Thank you for purchasing a Mark-10 Series DC digital test stand controller,
designed for use with Mark-10 motorized test stands. Mark-10 test stands and
controllers are ruggedly built for many years of service in laboratory and
industrial environments.
This User’s Guide provides setup, safety, and operation instructions for the
digital controller. Dimensions and specifications are also provided. Instructions
for the test stand may be found in a separate user’s guide.
For additional information or answers to your questions, please do not hesitate
to contact us. Our technical support and engineering teams are eager to assist
you.
Before use, each person who is to use a Series DC digital controller and
Mark-10 test stands should be fully trained in appropriate operation and
safety procedures.
TABLE OF CONTENTS
LIST OF INCLUDED ITEMS ...................................................... 3
OVERVIEW ................................................................................. 3
MECHANICAL SETUP AND SAFETY ....................................... 4
CONTROLS LAYOUT ................................................................ 7
TEST PARAMETER SETUP ...................................................... 8
OPERATING MODES ............................................................... 20
COMMUNICATING WITH MESURGAUGE ............................. 27
SPECIFICATIONS .................................................................... 29
DIMENSIONS ........................................................................... 29
WARRANTY ............................................................................. 29
OTHER MARK-10 PRODUCTS ............................................... 31
To Next Page
Loading...
Need help?
General
