Need help?Do you have a question about the Mark-10 Series 5 and is the answer not in the manual?
General| Model | Series 5 |
|---|---|
| Outputs | USB |
| Communication Interface | USB |
| Operating Temperature | 32 - 100°F (0 - 38°C) |
| Weight | 0.7 lb (0.3 kg) |
Provides crucial safety checks and procedures for operating the force gauge.
Details mounting options, shaft orientation, and attachment mounting for the force gauge.
Explains the layout and components of the gauge's home screen display.
Details the primary and secondary functions of each button on the force gauge.
Outlines how to navigate through the gauge's menu and sub-menus.
Introduces set points for tolerance checking and triggering external devices.
Details how to configure upper and lower set points for pass/fail testing.
Explains how to use set points to control motorized test stands.
Configuration settings for RS-232 and USB communication.
Overview of commands for controlling the gauge via external devices.
Guidance on physically mounting the gauge for calibration.
Detailed instructions for calibrating the force gauge, including error handling.
Provides general specifications like accuracy, sampling rate, power, and units.
Details the capacity and resolution for different Series 5 models.
To Next Page