Markilux 6000 - Hanging the Awning; Placing Awning on Wall Fixtures; Securing Awning Casing and Clamping Plate

5
1.4.2 Fasten the eaves fixture with a nail. Align the
fixture horizontally with a spirit level and fix with a
second nail.
1.4.3 Drill through the eaves at the screw holes.
Screw fixture with suitable fastening materials.
Align the fastening fixtures horizontally.
2. Hanging the awning (e.g. face fixture)
2.1 Place the awning on the wall fixtures, tilted
slightly upwards.
2.2 Let the casing rest on the rear slot and the
clamping plate.
2.3 Tightly screw the two outer socket head cap
screws of the clamping plate (SW8).