Markilux 710 User Manual

markilux important notes
Important information for the users of markilux awnings
markilux
made in germany
1. Manufacturing number
Every markilux awning was produced individually according to your guidelines and has a fabrication number on it, through which this
product becomes a unique product identifiable at any time.
2. Marking of important safety instructions
With this triangular warning, notes responding to dangers are
marked which can result in bad injuries or even death.
Furthermore it marks important information on the function
of the awning!
5. Wind resistance class
3. Reading of "Important Instructions" and the "Operating Instructions"
4. Proper use of an awning
With this triangular warning, notes are marked which respond
to dangers by electric shock resulting in bad injuries or even
death.
The instructions handed by the authorized markilux specialist must be read before the first awning use. It is important to read all instructions
for the safety of persons. All instructions are to be stored by the customer and have to be handed over to the new owner in case of an
eventual transfer of the awning to Third Parties.
0-14°
The awning is a sun protection construction.
Improper use may lead to significant hazards.
If the awning inclination is less than 25% =
14° measured at the horizontal or the awning
is not extended entirely, then it must not be
burdened by rainwater. There is a risk of the
formation of water pockets in the awning
cover and the awning may be damaged or
fall.
Alterations like rebuilding or enlargements
which are not intended by the manufacturer
may only be carried out with the markilux
manufacturers written approval. Additional
awning burdens by means of object
attachments or or rope wearing can result in
damage or dropping of the awning and are
therefore not allowed.
Wind resistance class 0 1 2 3
Wind speed V (km/h) maximum values < 28 28 38 49
Wind speed V (m/s) maximum values < 7.8 7.8 10.6 13.6
The awning complies with the wind resistance category requirements named in the CE
conformity mark (explanation see "handover declaration"). The CE conformity mark states an
agreement to be proved according to the valid European guidelines requirements, the
corresponding declarations can be requested via the authorized markilux service centre.
markilux
markilux GmbH & Co. KG
Hansestrasse 53
D-48282 Emsdetten
DIN EN 13561
Awnings for exterior applications
Wind resistance class 2
markilux folding-arm awnings,
markilux 710/810, 720/820, 730/830, 740/840, 750/850, 893, 776/776
tracfix (depends on size), 876/876 tracfix (depends on size), 779/779
tracfix (depends on size), 879/879 tracfix (depends on size), 625
tracfix (depends on size), 8850
Wind resistance class 3
markilux 620 tracfix, 625 tracfix (depends on size),
776/776 tracfix (depends on size), 876/876 tracfix (depends on size),
779/779 tracfix (depends on size), 879/879 tracfix (depends on size),
770 tracfix, 870 tracfix, 8800/8800 tracfix, pergola, pergola compact,
markant

Markilux 710 Specifications

General

Brand	Markilux
Model	710
Category	Accessories
Language	English