10
1. Safety Information 10
2. Connecting the Transformer 11
3. Technical Data 11
4. Short Circuit or Overload 12
5. Connections for the Controler 67025 12
6. Operation 13
1. Safety Information
Read the following safety information before using
a Märklin transformer for the first time:
• All transformers must be plugged only into an
outlet with the household current indicated on
the face plate of the transformer.
• This transformer is not a toy. It is designed for
the control of a model railroad layout.
• The transformer must be unplugged from the
electrical outlet before being moved. If the
transformer has been in operation, let it cool off
before moving it.
• Inspect the condition of the power cord and
the transformer housing at regular intervals
for damage. This visual inspection should
only be done when the power cords for all of
the transformers being used are unplugged
from the household current. If you have the
least suspicion that the transformer is dam-
aged, you should not use it again until it has
been thoroughly inspected and repaired by
an authorized service organization (example:
Märklin Service Department). The power cord
for the transformer must never be replaced. In
this instance dispose of the transformer in an
authorized manner, or send it to the Märklin
Service Department for exchange.
• The permanently attached connector cable
from the power pack to the layout may not be
changed. The use of an extension cable or a
distribution strip is not permitted.
To Next Page
Loading...
Need help?
General
