Marksman M10 - Page 2

Congratulations on your purchase of a quality Marksman automotive security and remote start
system. The information enclosed will provide a ready reference of the operation and maintenance
of your new Marksman security and remote start system.
Regular Transmitter Operation
Operation
Lock Doors and Arm System.
-
Arm and Noiseless Mode. Press within 3 Seconds.
-
Arm and Delete the Zone 1/Shock Sensor. Press Twice within 3 Seconds.
- -
Arm and Delete the Zone 4/Optional Sensor. Press Third Time within 3 Seconds.
- - -
Arm and Delete the Zone 1/Shock Sensor,
Press Fourth Time within 3 Seconds.
Delete the Zone 4/Optional Sensor.
Unlock Doors and Disarm System.
Disarm and Channel 2 (Trunk) Timer Control. Press and Hold for 2 Seconds.
2 Seconds
-
Two Steps Door Unlock and Disarm System. Press Twice within 3 Seconds.
Silent Arming/Disarming Ignition in "OFF" Position.
Hidden Alarm Function.
-
Activate Car-Jacking.
Ignition in "ON" Position and
Press and Hold for 2 Seconds.
2 Seconds
Car Locator.
Panic Function. Press and Hold for 3 Seconds. 3 Seconds
Activate Remote Start. Press and Hold for 1 Second. 1 Second
System's Status Check. For M10RF-LCD Only.
Channel 2 (Trunk) Timer Control. Press and Hold for 2 Seconds. 2 Seconds
-
Passive Arming By-Pass. While the System Disarmed.
Turn Off the Remote Start.
Switching Code for 2nd Car Operation or For M10RF-LCD Only.
Transmitter
System Function Remark
Button
Lock Doors, Arm System and Turn
Chirp Confirmation
On Paging Sensor.
2 Seconds
2
M10UM 2/20/02 12:26 PM Page 2