To Next Page

To Previous Page

4 Getting started

4.1 Installation tips

 Turn off all devices (TV and HDMI sources) before

connecting them to the Connect 620 UHD 2.0™. If a device

cannot be turned off, please remove the plug from the

socket.

 Only use High Speed HDMI® certified cables for the best

picture and sound quality. Using too much force to connect

or disconnect the HDMI cables may damage them.

 Please be careful when connecting your HDMI cables. These

damage easily.

4.2 Installation

1. Use an HDMI cable to connect the HDMI sources (such as a

game console, Blu-ray player or digital TV decoder) to the

HDMI ports marked "Input".

2. Use an HDMI cable to connect the TV to the HDMI port

marked "Output".

3. Connect the power adapter to the "DC 5V" and insert the

plug into the socket.

4. Pull the plastic strip from the remote control's battery

compartment to activate the battery and remove the

protective film from the top.

Marmitek Connect 620 UHD 2 User Manual

Questions and Answers: