6 © MARMITEK
1. Use an HDMI cable to connect the HDMI source (digital TV decoder,
Chromecast, media player) to the "HDMI input".
2. Use an HDMI cable to connect the TV (monitor or projector) to the
"HDMI output". If you want to use the ARC function (refer to page 6),
your TV needs to support this. Please refer to your TV's manual to
check which HDMI port supports ARC.
3. Use the appropriate audio cable to connect your audio device (home
cinema set, audio amplifier or soundbar) to the output marked
"Digital" or "Stereo".
x Digital: Use an optical (TOSlink) or coaxial cable; this audio
output supports DTS, Dolby Digital and PCM 2.0 formats.
x Stereo: use a stereo jack cable; this output supports the
analogue stereo audio format.
4. Connect the power adapter to the "DC 5V" and insert the plug into the
socket.
5. USE
5.1 Audio Return Channel (ARC) settings
In order to be able to use ARC, an ARC HDMI connection is required on
your TV, monitor or projector. If necessary, please refer to your TV's
manual for the correct ARC settings.
ARC ON (lamp is lit)
ARC is used to retrieve the TV's sound to the Connect AE14™ and is then
retransmitted to the connected audio equipment through the audio outputs.
This way, you can listen to all the TV's audio through the speakers of your
home cinema set, audio amplifier or soundbar.
ARC OFF (lamp is off)
The sound from the HDMI source (digital TV decoder, Chromecast, media
player) that is connected to the Connect AE14™'s "HDMI input" is
separated and then transmitted to the connected audio equipment through
the audio outputs. The full HDMI signal is also transmitted to the TV
through the "HDMI output".
To Next Page
Loading...
Need help?
General