Marmitek IR Control 10 - Technical Specifications

© MARMITEK
10
6 Technical specifications
IR receiver
Frequency range: 30-60 KHz
IR reception range: ± 10 meters
IR reception angle: 90º (+45º/-45º from centre)
Cable length: 3 meters, extendable up to 300 meters
IR reception indication: YES, purple indication LED
Status indication: YES, green indication LED
Receiver dimensions: 40 x 13 x 11mm
IR module
Power supply POWER: 100-240VAC 50/60Hz, 12VDC 200mA (supplied)
Power supply STATUS: 5-24VDC / 5-12VAC plug, - 5.5mm outside / + 2.1mm
inside (not supplied)
IR input: 1x 3.5mm jack connector, for standard IR receiver
1x screw connector, for up to 6 in parallel connected IR
receivers. Extendable up to 300 meters using CAT5 (or
equivalent)
IR output: 4x 3.5mm jack plug (mono), switchable for IR extension
cables with emitter or blaster LEDs
Dimensions: 95 x 46 x 20mm
IR extension cable with 2 emitter LEDs
Connection: 3.5mm jack plug (mono)
IR LEDs: 2x IR emitter LEDs
Cable length: 3 meters
Specifications may change without prior notice.