Need help?Do you have a question about the MARMON ANGELO PO BX61E and is the answer not in the manual?
Explains how to identify different product models based on their codes.
Provides a comprehensive table listing various BX model designations.
Details the power specifications for BX models, specifically FX-BX 2018.
Illustrates the electrical and gas connection points for the oven.
Outlines the required characteristics for the water supply to the appliance.
Describes the operational steps when the motorized valve is open.
Explains the system's behavior when the motorized valve is closed.
Details the process for draining, cooling, and condensing steam.
Covers the operation of steam production using specific injector codes.
Lists and describes the main electronic boards in BX ovens.
Explains how to record and view alarms on specific models.
A table explaining procedures after component replacement.
Instructions for resetting parameters on the BX control board.
Details the fuses used on the power board for non-BX-W models.
Details the fuses used on the power board for BX W models.
Table showing motor overload relay settings for electric ovens.
Table showing motor overload relay settings for gas ovens.
Service communication regarding electronic components serial numbers.
Explains the general operation principles of the gas system.
Detailed identification and description of all gas system components.
Outlines the operational logic and states of the combustion control board.
Comprehensive guide for gas testing, including valve adjustment and analysis.
Solutions for common problems encountered during gas test procedures.
Details on completing the installation report for warranty activation.
A table detailing gas alarms, their causes, and recommended solutions.
Details the operation and components of the washing circuit.
Procedures for clean testing, recommended washing steps, and interruption handling.
Table of washing alarms and consumption data for different programs.
Describes washing systems for 1st/2nd gen and MY2016 BX models.
Explains the CLE and dEC display warnings for washing and descaling.
Instructions for replacing the encoder component.
Steps for disassembling and replacing the motor.
Procedure for replacing the door micro-switch.
Steps to disassemble the door glass frame.
Explanation of the cooling system for the component compartment.
How to correctly adjust the oven door.
Instructions for replacing halogen bulbs with the new system.
Steps for replacing the oven door handle.
Procedure for replacing the spark plug and gasket.
Instructions for replacing the blower fan.
Details on gasket codes and changes for FX-BX models.
Recommended maintenance schedule for the oven.
Details standard alarms, their problems, and solutions for BX ovens.
Details alarms specific to BX-W models, including problems and solutions.
To Next Page
General
