EasyManua.ls Logo

Marpac 7-1545 - Section V Operating; Operating Instructions

Marpac 7-1545
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Page
4. Install Anchor Rope and Chain:
It is highly recommend you use a factory-spliced
Anchor Rope and Chain. Do not use a hook or
Recommended Marpac™ Anchor Rodes are:
 Specially treated 3-strand windlass grade nylon rope
that remains flexible even with constant exposure to sun
and salt water
 High test, hot-dipped galvanized chain
 Tapered back splice for a smooth transition from rope to
chain
Marpac
No.
G4 Chain Rope Total
Length
7-6455 10’ x 1/4” 150’ x 1/2” 160’
7-6456 15’ x 1/4” 200’ x 1/2” 215’
7-6457 15’ x 1/4” 300’ x 1/2” 315’
The Best Marpac™ Anchor Rodes are:
 Special 8 plait rope that eliminates all hockling and kink-
ing, and reduces the risk of jamming the windlass gypsy
 8 plait rope resists stiffening with age and enables 50%
more line in the anchor locker
 High test, galvanized chain
 Include a stainless steel swivel to make it difficult for the
chain to get twisted
Marpac
No.
G4 Chain Rope Total
Length
7-6450 10’ x 1/4” 125’ x 1/2” 135’
7-6451 10’ x 1/4” 200’ x 1/2” 210’
7-6453 15’ x 1/4” 300’ x 1/2” 315’