Marquant 014367 - Manual Settings; Clock and Date Configuration; Alarm Settings; Setting Daily Alarms

EN
34
4. The main unit searches for the outdoor sensor. This takes
about 3 minutes and a ashing icon for a radio mast is
shown on the outdoor part of the receiver display.
5. Open the battery compartment on the wireless outdoor
sensor and the battery compartment on the main unit and
insert 2 AAA batteries with the correct polarity as shown by
the markings.
6. When the receiver has created a connection to the outdoor
sensor it switches to clock mode.
MANUAL SETTING OF CLOCK
1. Press the MODE button for 2 seconds. The year value (2013)
starts ashing. Use the UP and DOWN buttons to set the
year.
2. Press the SET button to conrm. The month value starts
ashing. Use the UP and DOWN buttons to set the month.
3. Press the SET button to conrm. The date value starts
ashing. Use the UP and DOWN buttons to set the date.
4. Press the SET button to conrm. The values for month and
date start ashing. Use the UP and DOWN buttons to select
the display format month/day or day/month.
5. Press SET to conrm. The 12/24 hour display starts ashing.
Use the UP and DOWN buttons to select 12 hour or 24 hour
display.
6. Press the SET button to conrm. The hour value starts
ashing. Use the UP and DOWN buttons to set the hour.