EasyManua.ls Logo

Marquant 014367 - Signal Transfer; Sensor Signal Reception; Barometer Pressure History; Viewing Last 12 Hours Data

Marquant 014367
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EN
36
6. The alarm will continue for 1 minute if it is not deactivated
by pressing a button. In which case the alarm will repeat
automatically after 24 hours.
7. Ascending alarm signal (duration 1 minute): The volume
changes 3 times during the duration of the alarm signal.
SWITCHING OFF THE ALARM
Press any button other than SNOOZE to switch o the alarm. The
alarm is repeated at the same time the next day.
SNOOZE MODE
Press the SNOOZE button to activate snooze mode. The alarm
sounds again after about
5 minutes.
TEMPERATURE DISPLAY
The temperature is shown in °C or °F. Press the DOWN button to
select to display in °C or °F.
DISPLAY OF BAROMETER PRESSURE
The barometer pressure can be shown in inHg or mbar/hPa. Press
the HISTORY button for
2 seconds. The unit for barometer pressure starts ashing. Use the
UP and DOWN buttons to select the unit for barometer pressure.

Related product manuals