USE
Before using for the rst time
• Open the battery compartment on the back of the receiver and
insert the batteries with the correct polarity. Replace the battery
compartment cover.
• Open the battery compartment on the back of the transmitter and
insert the batteries with the correct polarity. Replace the battery
compartment cover.
• When the batteries are inserted all the symbols on the display will
go on for 3 seconds.
• The receiver searches for a connection to the transmitter. This takes
about 3 minutes and a ashing icon for the RF antenna is shown in
the receiver display outdoor eld.
Indoor temperature
Outdoor temperature
Highest/Lowest
outdoor temperature
Signal indicator
Clock
Time format
To Next Page
Loading...