MARQUES BM 1000 - Power and Environmental Specifications; Safety Precautions and Warnings

GUIDE DE L’UTILISATEUR - BM1000
FR
12 /2018, REV.1.0 13
BM1000 – USER GUIDE
EN
12 11/2018, REV.1.0
SAFETY
POWER AND ENVIRONMENTAL SPECIFICATIONS
WARNING
• Only permit qualified personnel to service this equipment. Exercise care when
making checks, tests and adjustments that must be made with power on.
Disconnect all power to this unit before servicing.
• Failing to observe these precautions can result in body harm.
• Always disconnect the equipment from the power source before cleaning or
performing maintenance. Contact technical support for parts, information and
service.
CAUTION
• Observe precautions for handling electrostatic sensitive devices.
• Danger of explosion if battery is incorrectly replaced. Replace only with the
same or equivalent type recommended by the manufacturer. Only permit
qualified personnel to service this equipment.
• Dispose of used batteries according to your local regulations.
PROPER DISPOSAL
• Properly dispose of this device when it reaches the end of its useful life. It must
not be disposed of as unsorted municipal waste. Within the european union,
this device should be returned to the distributor from where it was purchased
for proper disposal. This is in accordance with eu directive 2012/19/eu.
AC Version DC Version
Power supply voltage
230V AC 12V DC
Power supply frequency
50/60Hz -
Nominal supply Power
15W 12W
Operating temperature
0-40°C
Operating humidity
10-90% RH
VIEW
1
6
9
5
2
3
8
1
4
5
6
9
7
K
C
S2
A
B
F
D
S1
01 Shift / État A RS232 #2
02 Mise à zéro B RS232 #1
03 Tare C Plateforme #2
04 Fixer la tare D Plateforme
05 Imprimer / Envoyer F Alimentation
06 Confirmation K Touche d'étalonnage
07 Allumer / Éteindre S1 Joint de boîtier
08 Affichage S2 Joint d'étalonnage
09 Donnés Métrologiques