Marquis WISH User Manual

UNDERWATER AND ENTRYWAY LIGHTS
Press the LIGHT pad to turn the underwater and
entryway lights on and off. The low-voltage system
produces a night light for evening use and makes
entering and exiting the spa safer. After being on for
30 minutes, the lights automatically turn off.
OPTIONAL WATERCOLORS™*
Press LIGHT pad to turn on step one. Press LIGHT
pad again to turn off for one second. Then press
LIGHT pad again for step two. Repeat for all eight
options: 1) color wash, 2) white, 3) blue/green, 4)
violet, 5) blue, 6) yellow, 7) green, 8) red.
*(12 LED)
JETS
Use the JET pad on the bather panel or auxiliary jet
control panel. First press of the JET pad activates
pump on low-speed (and starts soak timer). Second
press of the JET pad activates pump on high-speed.
Third press of the JET pad turns jets off for all-quiet
mode. Fourth press of the JET pad turns pump back
to low-speed. If the pump is already on low (heating,
filter cycle) then the first press starts the soak timer.
After running on low- or high-speed for 15 minutes,
the pump automatically turns off (unless in heating
or filtering cycle).
SOAK TIMER AND SOAK FEATURE
The soak timer starts the first time you press a JET
pad. The LCD window displays the elapsed time (1-
30) for 55 seconds then switches to the current
water temperature for five seconds then back to the
timer. It continues to alternate for the entire 30
minutes. The timer runs for 30 minutes regardless of
other functions in use (jets, temperature, or light).
You can manually cancel the timer by pressing the
TEMP+- pad and then the LIGHT pad.
PAGE 38
THE SPIRIT, MIRAGE, AND WISH
spa control operation
O
s
s
O
s
s
LIGHT
JET
AUXILIARY JET
CONTROL PANEL
JET
TEMP +-
MARQUIS SPAS

Marquis WISH Specifications

General

Brand	Marquis
Model	WISH
Category	Hot Tub
Language	English

Summary

Spa Control Operation

Lighting Controls

Manages underwater and entryway lights, including optional WaterColors for ambiance and safety.

Jet Operation and Soak Timer

Controls jet pump speeds and activates a 30-minute soak timer for hydrotherapy sessions.

Water Management and Filtration

Configures filtration cycles, Smart Logic, and temperature settings for optimal spa operation.

Heat Modes and System Lock

Selects heating modes (Standard, Economy, Sleep) and secures settings via system lock.

Equipment Diagram

Component Identification

Visual overview of spa components and their quantities across various Marquis spa models.

Troubleshooting

Equipment Operation Issues

Addresses common problems like equipment failure, inadequate jet action, and lack of heat.

LCD Diagnostic Messages

Explains various error codes and messages displayed on the control panel for system diagnostics.

Marquis Care and Enjoyment Guide

Water Treatment Fundamentals

Covers water balance, sanitizing methods, and essential chemical safety procedures.

Spa Maintenance Schedule

Details recommended cleaning and maintenance tasks for weekly, monthly, and periodic intervals.

Spa Enhancements

Highlights optional products and accessories to improve the spa experience and functionality.