Need help?Do you have a question about the Mars COMFORT-AIRE CMA36SD-1 and is the answer not in the manual?
Key warnings regarding installation defects, part usage, location, and wiring.
Cautions for grounding, flammable gas locations, and drainage piping. Important for safe operation.
Step-by-step guide on setting thermostat and fan for cooling operation. Covers basic usage.
Important note on waiting before restarting the unit to prevent damage.
Guidance on cleaning air filters and outdoor unit coils for optimal performance.
Warning to turn off power before maintenance to prevent electrical shock or death.
Information on how alterations or non-authorized parts void warranty and affect safety.
Instructions for checking the unit upon delivery for damage and filing claims if necessary.
Specifies the operational temperature range for cooling and warranty implications.
Details on compatibility with indoor units and the importance of proper metering devices.
Guidance on thermostat selection, fan time delay, and placement recommendations.
Warning: An in-line filter drier is required; its absence voids the warranty.
Guidelines for selecting an optimal location, including proximity and protection from elements.
Ensuring unobstructed airflow and maintaining clearances around the unit, referencing diagrams.
Instructions for securely anchoring the unit and ensuring proper condensate drainage.
Provides specific dimensions and clearance requirements for different model sizes.
Guidelines for electrical wiring, NEC/local codes, and supply voltage requirements.
Steps for connecting wiring to the outdoor unit, including cover removal and cable connections.
Warning about potential malfunctions and safety hazards from incorrect wiring.
Table detailing power supply, voltage, circuit breaker, and ampacity for different models.
Diagrams showing terminal block connections for 12K and 18K-48K models.
Note referring to thermostat manual for additional wiring instructions.
Circuit diagrams for 12K and 18K models.
Circuit diagrams for 24K, 30K, and 36K models.
Circuit diagram for the 48K model.
Disclaimers stating diagrams are for reference; actual wiring may differ.
Factors affecting system capacity, efficiency, and oil return, including line length and bends.
Table detailing max refrigerant line length and vertical lift for different models.
Guidance on installing tubing, insulation, and P-traps for proper refrigerant flow.
Warning against illegal refrigerant discharge; emphasizes proper reclaiming methods.
Information on the unit's R-410a charge and the state of service valves.
Step-by-step guide for performing leak tests, evacuation, and refrigerant release.
Description of automatic unit operation based on thermostat settings.
Essential steps before operating the unit: panel installation, power connection, and thermostat setup.
Sequence of checks for thermostat, fan, and system operation before field charging.
Guidance on system charge, factors affecting it, and using metering devices for optimal performance.
Final visual checks, performance review, and homeowner orientation.
Charts to reference operating pressures against ambient temperature for performance verification.
Formula and table for calculating additional refrigerant needed based on line set length.
Overview of the 'CMA' Series warranty coverage and congratulations.
Details of the one-year parts and five-year compressor limited express warranties.
Specifies the one-year parts warranty for commercial or non-residential applications.
Lists items not covered and requirements for warranty coverage, including proper operation and installation.
Information on warranty start date, proof of purchase, and the sole remedy being part replacement.
Legal limitations on warranties and procedures for claiming warranty service.
Section for recording purchase details for warranty purposes.
To Next Page
General
