To Next PageTo Next Page
Need help?Do you have a question about the Mars HRG14 P Series and is the answer not in the manual?
General| Heating Capacity | 14 kW |
|---|---|
| Cooling Capacity | 12 kW |
| Refrigerant | R410A |
| Series | P Series |
| Type | Heat Pump |
Guidelines for positioning the outdoor unit on a solid pad, elevation, rooftop mounting, and required clearances.
Recommendations for selecting line set diameters, proper routing, insulation, and avoiding contact with structures.
Procedure for making braze connections with nitrogen flow and methods for checking refrigerant lines for leaks.
Instructions for evacuating the system to 300 microns and opening service valves after installation.
Details on low voltage control wiring, thermostat connections, and separation from power leads.
Configuration for emergency heat mode using thermostat settings and jumpers.
Guidance on adjusting refrigerant charge based on line set length and measuring subcooling.
Methods for checking system charge in cooling mode and heating mode at specific ambient temperatures.
How the emergency heat feature works and when to use it, including after power outages.
Explanation of the defrost system components (thermostat, control) and their timing functions.
Information on diagnostic LEDs, pressure switch functions, and lockout features.
Explains unique characteristics like frost formation, defrost cycles, and humidity removal.
Guidance on setting thermostat controls like temperature levers, fan switch, and system switch.
Checks recommended for qualified service technicians, including motor, coils, and refrigerant.
Instructions for inspecting and cleaning air filters, indoor coils, and condensate drains.
Guidance on cleaning condenser coils and maintaining painted surfaces with wax.
Steps to take before calling for service, including thermostat settings and component checks.
