Need help?Do you have a question about the marsden B-300 and is the answer not in the manual?
Important instructions for installation, proper use, and maintenance of the device.
Remove from box, remove film, and place scale on a hard, flat surface for accuracy.
Uses 4x AA batteries; low battery shown on LCD. Replace batteries when 'LobRE' is displayed.
Instructions for installing 4 x AA 1.5V alkaline batteries for battery operation.
Functionality for powering on, taring, and powering off the scale.
Instructions for placing the scale and turning it on to zero the display.
Instructions for calculating the number of like items based on total weight.
Step-by-step guide to recalibrate the scale using a 20 lb calibrated weight.
Procedure to set or disable the auto-shut off time to conserve battery power.
Instructions for connecting the scale to a PC, including pin configuration and port settings.
Indicates low battery voltage; requires battery replacement or AC adapter.
Occurs when load exceeds maximum capacity; requires reducing the load.
Indicates a fault in load cells or wiring; contact service representative.
To Next Page
General
