The Boxer
OPERATOR’S MANUAL
INTRODUCTION
All scales come complete with an easy to clean stainless steel top on a study steel frame, and a
remote indicator with a large LCD display which is easy to read from a distance.
The water-resistant keyboard has 4 easy to use function keys: NET/GROSS -UNIT-ON/OFF-TARE.
With the standard AC adapter included and the facility for dry cell batteries, the scales can be used in
a fixed location or as a portable scale.
ASSEMBLY
The scale comes complete with the stainless steel top and a power supply module.
Plug the power supply into the socket on the left side of the weight indicator. Then plug the power
supply into the mains power.
The scale can also be used with batteries for a truly portable scale
Installing batteries
Power can be supplied by mains adapters delivering a regulated 6 to 15VDC 100 mA , or using
batteries inside of scale’s head (6 x AA Size). Remove the cover from the battery compartment
under the stainless steel pan by lifting the tab. Install six AA size batteries as shown:
It is suggested Alkaline batteries be used for best life.
SPECIFICATIONS
Model # MPS 30 MPS 60 MPS 150
Maximum Capacity 30 kg 60 kg 150 kg
Readability 0.01 kg 0.02 kg 0.05 kg
Resolution 1:3000 1:3000 1:3000
Tare Range Full range Full range Full range
Repeatability (Std Dev)
+/- 1d +/- 1 d +/- 1d
Linearity ±
+/- 2d +/-2d +/- 2d
Units of Measure Kg/lb/oz
Stabilisation Time 1-2 secs.
Operating Temperature 5°C - 35°C or 13 F - 95°F
Power supply 6 x AA batteries or 9V-15V 100ma AC adapter
Calibration Automatic External
Calibration mass
20 kg 40 kg 100 kg
Indicator display 26mm/1.0” LCD digital display showing
net, gross, zero, stable and weighing units
Platform Size 310 x 300 mm / 12¼ x 12”
Dimensions (w x d x h)
Base: 310 x 300 x 50 mm
12 ¼ x 12 x 2”
Indicator: 270 x 80 x 30mm
11 x 3 x 1”
Gross Weight 4.8 Kg / 10.6 lb.
6 X "AA" Alkaline
To Next Page
Need help?
General
