Need help?Do you have a question about the marsden MSS-I-400 and is the answer not in the manual?
Please do not use corrosive liquids or large amounts of water to clean the scale. Always disconnect the scale from the mains power supply before cleaning.
The scale does not require any routine maintenance. However, we recommend checking the scale's accuracy at regular intervals.
The mild steel base is fitted with four adjustable levelling feet. Please adjust these accordingly to ensure the base is level.
Press PRINT/ON/OFF to power-on the scale. When the scale shows 0.000 it is ready for weighing.
If at any time the reading shows anything other than 0.000 when there is nothing on the scale, you can reset the display.
Press HOLD once. The scale will lock onto and stabilise the weight reading for the item. The reading will remain displayed.
Place the item you wish to deduct the weight of (such as a plate or bowl) on the scale and press TARE.
To switch the weight reading between kg and lb, press LB/KG. The LED panel will indicate whether the reading is showing in kg or lb.
To count items on the scale, place a sample quantity, switch to count mode, and input the sample size.
You can use the scale to total up several loads. Add your first item to the scale and press TOTAL. Remove the item.
To set the time out function, press and hold HOLD until 'F1' is displayed, then configure the time out period.
Displays common error codes like EEE, overload, zero errors, and EEPROM errors with their respective solutions.
To Next Page
General
