CONNECTING SOURCES BY CABLE
THERE ARE A NUMBER OF WAYS TO CONNECT TO YOUR STANMORE THE
OLD FASHIONED WAY, USING A CABLE. USE ONE OF THE THREE AUDIO
INPUTS AVAILABLE: INPUT 1 - 3.5MM STEREO PLUG, INPUT 2 - RCA
ANALOGUE INPUT OR THE OPTICAL AUDIO DIGITAL INPUT.
• INPUT 1 - 3.5MM STEREO PLUG
USE THE DOUBLE-ENDED COIL CORD WITH 3.5MM PLUGS TO
CONNECT TO AUDIO SOURCES THAT HAVE AUDIO OUTPUT SUCH AS
A MOBILE TELEPHONE, IPHONE/IPAD/IPOD, MP3 PLAYER, OR
AIRPORT EXPRESS.
• INPUT 2 - RCA ANALOGUE INPUT
USE THE RCA ANALOGUE INPUT TO CONNECT TO YOUR CD PLAYER,
TURNTABLE (WITH RIAA) OR SONOS UNIT.
• OPTICAL AUDIO DIGITAL INPUT
USE THE OPTICAL INPUT TO CONNECT TO YOUR TV, APPLE TV,
AIRPORT EXPRESS, HARD DISK PLAYER, STREAMING PLAY, AND
SATELLITE OR CABLE RECEIVER. OPTICAL INPUT WORKS WITH PCM
STEREO ONLY. IF A CONNECTED DEVICE SENDS 5.1 AUDIO (OR
SIMILAR SURROUND SOUND), THE STANMORE WILL NOT FUNCTION.
SET THE AUDIO OUT TO STEREO ONLY ON YOUR TV, EVEN IF THE
SHOW IS BROADCASTED IN 5.1 AUDIO.
020.
NOTE: OPTICAL AUDIO CABLE AND RCA
CABLE NOT INCLUDED WITH THE STAN-
MORE AND MUST BE PURCHASED SEPA-
RATELY.
To Next Page
Loading...