Marshall Amplification 1987X User Manual

PRESENCE BASS MIDDLE
TREBLE HIGH TREBLE NORMAL
MAINS
ON ON
STANDBY
LOUDNESS 1 LOUDNESS 2
INPUTS
1
1
2
2
0
28
6
4
10 0
28
6
4
10 0
28
6
4
10
0
28
6
4
10 0
28
6
4
10 0
28
6
4
10
MK
II
7 8 9 10
ENGLISH
EQ control can change the way that the
other controls behave – experiment to nd
your sound.
8. HIGH TREBLE LOUDNESS 1
Controls the overall output level of
Channel 1.
Tonal Note: This channel is voiced for a
higher treble response than Channel 2.
9. NORMAL LOUDNESS 2
Controls the overall output level of
Channel 2.
Tonal Note: Channel 2 is voiced for normal
response.
10. INPUTS
1 (Top)
Connects the guitar to Channel 1.
1 (Boom)
Connects the guitar to the lower
sensivity input on Channel 1.
2 (Top)
Connects the guitar to Channel 2.
2 (Boom)
Connects the guitar to the lower
sensivity input on Channel 2.
Tonal Note: Although the top input of
channel 1 is the input that most guitarists
use, don’t be afraid to experiment. Some
guitar players prefer to mix the two
channels together by connecng a short,
screened patch lead between the boom
input of Channel 1 and the top input of
Channel 2. If you then plug your guitar into
the top input of Channel 1, you can mix
the dierent tonal characteriscs of each
channel for greater exibility (See diagram).
INPUTS
1
1
2
2

Marshall Amplification 1987X Specifications

General

Brand	Marshall Amplification
Model	1987X
Category	Amplifier
Language	English