Need help?Do you have a question about the Marshall Amplification DRP-1 and is the answer not in the manual?
General| Brand | Marshall Amplification |
|---|---|
| Model | DRP-1 |
| Category | Amplifier |
| Language | English |
Details the primary controls on the front panel of the DRP-1, including volume, tone, and boost settings.
Explains the Pre-Amp Volume control for input gain and its interaction with the boost switch for different gain levels.
Describes the Master Volume control, regulating signal to the power amp and influencing tone and overdrive.
Details the Bass, Middle, and Treble controls, designed for Marshall amp sound emulation and tonal shaping.
Covers the Line Level control for outputting signal from various jacks, including Pre-Amp Out and Line Out.
Explains the multi-purpose switch for gain selection and momentary battery level testing.
Describes the LED that indicates sufficient battery power when activated by the boost switch.
The primary input for connecting your guitar to the DRP-1.
Accepts 9V DC power from a regulated power supply.
A buffered output for feeding a live guitar system, like a separate power amp.
Provides output from the power amp/loudspeaker emulator for direct recording.
Stereo jack to input effects processors into the headphone amplifier.
Stereo 3.5mm jack for connecting headphones for private practice.
Location for the 9V PP3 or equivalent battery, accessible via a finger-removable cover.
To Next Page