To Next PageTo Next Page
Need help?Do you have a question about the Marshall Amplification AVT50HX and is the answer not in the manual?
General| Power Output | 50 Watts |
|---|---|
| Type | Hybrid Amplifier Head |
| Channels | 2 |
| Effects | Reverb |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" Jack, 1 x Speaker Output |
| Footswitch | Optional |
| Controls | Gain, Volume, Treble, Middle, Bass, Reverb |
| Speaker Size | N/A (Head Only) |
Details the history and evolution of Marshall's Valvestate amplifiers from the early 90s.
Explains the focus on achieving valve-like feel and tone in the AVT series for enjoyable playability.
Describes the use of ECC83 valves in the preamp stages for authentic sound and valve-like saturation.
Introduces the AVT20X, AVT50X, and AVT50HX models as powerful amps with Marshall tone and feel.
Explains the guitar input jack and the importance of using a high-quality screened cable.
Describes the switch for selecting between the Clean and Overdrive channels on the amplifier.
Details the gain control for shaping the amp's tone, from clean to bluesy crunch and high-gain distortion.
Explains the volume control for output level and how it contributes to power amp saturation.
Describes the Bass, Middle, and Treble EQ controls for shaping the amplifier's sound.
Explains the control used to adjust the intensity and mix of the internal spring reverb.
Details the stereo CD input for playing along with external audio sources.
Details the DI output for authentic amp tones in recording or silent practice.
Explains the power connection and the importance of matching supply voltage to the amplifier.
Describes the headphone jack for silent practice, which also mutes the main loudspeaker.
Explains how to connect external loudspeaker cabinets to enhance the amplifier's sound.
Explains the guitar input jack and the importance of using a high-quality screened cable.
Details the gain control for the clean channel, affecting tone from clean to bluesy crunch.
Explains the volume control for the clean channel and its contribution to power amp saturation.
Describes the Bass and Treble EQ controls for the clean channel.
Explains the switch to select between the Clean and Overdrive channels for the amplifier.
Details the gain control for the overdrive channel, from vintage to modern high-gain tones.
Explains the volume control for the overdrive channel and its impact on output level.
Describes the Bass, Middle, and Treble EQ controls for the overdrive channel.
Explains the control for adjusting the intensity of the internal spring reverb.
Details the stereo CD input for playing along with external audio sources.
Describes the headphone jack for silent practice, which also mutes the main loudspeaker.
Explains the power connection and the importance of matching supply voltage to the amplifier.
Details connecting external speakers for both combo and head versions of the amplifier.
Details the DI output for authentic amp tones in recording or silent practice.
Explains connecting external effects units to the amplifier's effects return input.
Details connecting external effects units to the amplifier's effects send output.
Explains connecting the channel select footswitch to control the amplifier's channels.
Provides recommended settings for a bright, clean tone with good mid definition.
Offers settings for a harmonically rich, clean tone with slight break-up and compression.
Details settings for achieving classic British crunch tones, balancing gain and volume.
Suggests settings for a Master Volume style crunch using mild preamp saturation.
Provides settings for high-gain lead tones with ample sustain and rich harmonic overtones.
Offers settings for aggressive, scooped modern distortion with boosted gain and EQ.
Specifies the power output ratings for the AVT20X, AVT50X, and AVT50HX models.
Lists the input impedance for the main guitar connection across different models.
Lists the input impedance for connecting CD or tape players to the amplifier.
Details the output level of the emulated DI signal for recording purposes.
Specifies the output level of the FX Send jack for connecting external effects units.
Provides the weight specifications for the AVT20X, AVT50X, and AVT50HX amplifiers.
Lists the physical dimensions in millimeters for the different amplifier models.
Details the specifications of the custom Celestion speakers used in the amplifier combos.
Lists the type of valve used in the amplifier's preamp section (ECC83).
