Marshall Amplification CV630-IP - Page 21

English - 38
6.2.10 Setting-Time
No
Item
Function Descriptions
1
Camera Time
Display the date and time of the camera
2
Set the Time
■ Manually: Set time manually
■ Synchronize with computer time: Set the camera time according
to the computer time
■ Synchronize with SNTP server: Set the camera time
synchronously with the SNTP server
<Remark> SNTP server address: Please change in network setting
6.2.11 Setting - Maintenance - Upgrading Firmware
No
Item
Function Descriptions
1
Firmware Update
The camera firmware may be upgraded via web page. For the upgrade
method, please download the FW upgrade manual from Marshall
official website
6.2.12 Maintenance - Incident Log
1
2
English - 39
No
Item
Function Descriptions
1
Event Logs
If the camera encounters errors, an error code log will be established
6.2.13 Setting - Maintenance - System Service
No
Item
Function Descriptions
1
Reset to the default
value
Select the reset button to resume the factory default setting as the web
page setting
2 Setting File
The web page setting parameters can be exported from the computer
and imported/applied to another camera
3 Baud Rate
Set the camera Baud Rate for the use of connecting RS-232
communication
1
2
3
English - 40
6.2.14 About
No
Item
Function Descriptions
1
Camera name
Display the camera name
2
Firmware Version
Display the firmware version of the camera
3
Serial No.
Display the camera serial No.
1
2
3
CV630-IP Manual
www.marshall-usa.com39 40