To Next PageTo Next Page
Need help?Do you have a question about the Marshall Amplification JTM60 and is the answer not in the manual?
General| Type | Tube Amplifier |
|---|---|
| Power Output | 60 Watts |
| Speaker Configuration | 1x12" |
| Tubes | 3 x ECC83, 2 x EL34 |
| Effects | Reverb |
| Channels | 2 |
| Controls | Volume, Treble, Middle, Bass, Presence |
| Footswitch | Included |
| Speaker | Celestion |
| Effects Loop | Yes |
Essential safety guidelines for operating the amplifier, including electrical and environmental precautions.
Overview of Marshall Amplification's history and the JTM range's lineage and features.
Guidance on setting up the Normal channel for clean sounds, adjusting volume and tone controls.
Instructions for obtaining vintage overdrive sounds using the Boost channel and master volume.
Tips for setting up the Boost channel for high-gain sounds with emphasis on gain and tone controls.
Details on connecting the guitar and switching between Normal and Boost channels via footswitch or panel.
Explanation of Volume, Bass, Middle, Treble, and Reverb controls for the Normal channel.
Description of Gain, Volume, Bass, Middle, Treble, and Reverb controls for the Boost channel.
Explanation of Parallel Mix Effects, Master Volume, and Reverb controls for both channels.
Operation of the main Power Switch and Standby Switch for valve heating and amplifier activation.
Details on Mains Fuse, Mains Input, and Speaker Outputs (internal and extension).
Description of Parallel and Series FX Loop Send and Return jacks for external processors.
Explanation of the Line Out feature, its emulation, and the Presence control for tone shaping.
Illustrations detailing how to connect the XLR output to various mixer inputs.
