To Next PageTo Next Page
Need help?Do you have a question about the Marshall Amplification MG100DFX and is the answer not in the manual?
General| Wattage | 100W |
|---|---|
| Output Power | 100W |
| Channels | 2 |
| Effects | Yes |
| Type | Solid State |
| Digital Effects | Reverb, Chorus, Flanger, Delay |
| Speaker Size | 12 inches |
| Speaker | Custom 12" Speaker |
| Controls | Gain, Volume, Bass, Middle, Treble, Reverb |
| Inputs | 1 x 1/4" Instrument |
| Outputs | Line out |
| EQ | 3-band |
| Footswitch | Optional |
Read manual, use correct lead, avoid liquid/objects, refer servicing to qualified personnel, avoid damp conditions.
Unplug during lightning storms or long periods of non-use to protect against surges and damage.
Protect the power cord from being walked on or pinched, especially at plugs and entry points.
Never switch the amplifier on without the loudspeaker connected to prevent damage.
Equipment complies with EMC and Low Voltage directives; peak inrush current is 21 amps for E.U. models.
Avoid unauthorized modifications. Use high-quality screened audio cables up to 10m, and non-screened for extension cabinets.
Ensure free airflow around the amplifier. USA: Use polarized/grounding plugs correctly; consult electrician for outlet replacement.
Gain, Bass, Middle, Treble controls for the Clean Channel, including Clean/Crunch select switch.
Gain, Bass, Middle, Treble, Contour controls for Overdrive Channel, plus OD1/OD2 select and channel select.
Details adjustable parameters for Chorus/Delay, Delay, Chorus, and Flange effects via PRESET/ADJUST and FX LEVEL controls.
Covers the CHANNEL SELECT switch, OD LED indicator, and footswitch operation for channel selection.
Mains Input connector and Loudspeaker Output sockets for both Combo and Head models.
Includes FX RETURN, FX SEND, FX LEVEL switch, and the FOOTSWITCH connection port.
Details power output (100W RMS into 4 ohms) and main guitar/CD input impedances for both models.
Specifies Emulated Output Level (+4dBV) and the physical weight of the MG100DFX and MG100HDFX units.
Provides the overall physical dimensions (Size in mm) for both the MG100DFX Combo and MG100HDFX Head.
