Need help?Do you have a question about the Marshall Amplification MG SERIES and is the answer not in the manual?
General| Type | Solid State |
|---|---|
| Speaker | 2x12" (depending on model) |
| Effects | Reverb |
| Controls | Gain, Volume, Reverb |
| Inputs | 1 x 1/4" Instrument, 1 x 3.5mm Aux In |
Personal introduction from Jim Marshall regarding the MG series amplifiers and their design philosophy.
Detailed explanation of each control and input/output socket on the MG15CFX and MG30CFX front panels.
How to select between Clean, Crunch, OD-1, OD-2 channels and switch between Preset and Manual modes.
Explanation of Reverb, FX (Chorus, Phaser, Flanger, Delay, Octave), and Tap Tempo functionality for delay effects.
Details on MP3/Line In, Headphone sockets, and the Power switch operation.
Technical data including Power, Channels, Speaker, Weight, and Dimensions for MG15CFX and MG30CFX.
Description of all rear panel inputs, outputs, and controls for the larger MG amplifier models.
Technical data for MG50CFX, MG101CFX, MG102CFX combos and MG100HCFX head.
How to select channels and operate in Preset and Manual modes on larger MG amplifiers.
Details on Reverb, FX, Delay, Tap Tempo, Damping, and the External FX Loop functionality.
Explanation of MP3/Line In, Headphone/Line Out, Loudspeaker connections, and Power switch.
Overview of the footcontroller's switches, LED status panel, and digital display functions.
Instructions for assigning front panel switches and complete presets to footcontroller switches.
How to access and use the built-in tuner via the footcontroller or front panel switches.
Configuration settings for the Clean factory preset, including effect usage.
Configuration settings for the Crunch factory preset, including effect usage.
Configuration settings for the OD1 factory preset, including effect usage.
Configuration settings for the OD2 factory preset, including effect usage.
To Next Page
