16 /20
56208004-01
Installation instructions
1. Install the drain port and drain hose.
Condensate will drain from the outdoor unit
when it operates in heating mode. In order
to protect the environment and prevent
hazardous conditions, install a drain port and
hose to direct the condensate to a suitable drain.
2. Install and fix the outdoor unit.
Fix with rawlbolts (or similar) to a flat level surface
that is strong enough to bear the weight of the
unit. Alternatively use wall mounting brackets (55021100)
3. Pipework connections.
Remove the valve caps from the 2-way and
3-way valves.
Connect the pipes to the relevant valve and tighten
to the correct torque. See page 16
The system must be evacuated prior to being operated.
Outdoor unit installation
Evacuation
To Next Page
Loading...
