To Next PageTo Next Page
Need help?Do you have a question about the Marstair ECO+ and is the answer not in the manual?
General| Brand | Marstair |
|---|---|
| Model | ECO+ |
| Category | Air Conditioner |
| Language | English |
Step-by-step instructions for correctly installing batteries in the remote controller.
Recommendations for storing the remote controller when it is not in use.
Instructions on how to effectively use the remote controller to interact with the unit.
Detailed procedure for utilizing the intelligent FEEL mode for automatic temperature control.
Instructions for setting the timer to schedule system start or stop times.
Steps for cleaning and maintaining the exterior front panel of the indoor unit.
Guidelines for cleaning and reinstalling the air filters to ensure efficient operation.
Details on environmental conditions that trigger protective cut-offs and system self-protection mechanisms.
Advice on unit placement to minimize operational noise and environmental impact.
Explanation of the unit's protective functions and recommended periodic inspections.
Description of preheat, afterheat, and automatic defrost functions during heating cycles.
Visual guide and spatial requirements for ideal indoor and outdoor unit placement.
Steps for connecting the power and interconnecting cables to the unit.
Key considerations and best practices for selecting optimal installation sites for both units.
Detailed process for securely fixing the mounting plate for the indoor unit.
Procedure for creating appropriate holes in walls for routing refrigerant and drain pipes.
Steps for routing and connecting the refrigerant pipes and drain hose for the indoor unit.
Methods for insulating pipework joints and the main pipe runs to prevent heat loss/gain.
Guidance on connecting refrigerant pipes and applying correct torque to fittings.
Detailed instructions for connecting electrical cables between the indoor and outdoor units.
Specifications for power and interconnecting cables, including core sizes and types.
Procedures for installing the outdoor unit, including drain port setup and pipework connections.
Crucial steps for removing air and moisture from the refrigerant system before operation.
A detailed, step-by-step guide for performing the system evacuation process.
