Close the steam relief valve (pic 6).
Press “MНЦЭ” button
until you see indication of required cooking program on the display. For «/Chef» program selection press button .
Preset for the program cooking time is shown on the display.
IП вШЮ НШЧ’Э аКЧЭ ЭШ МСКЧРО ЩrОЬОЭ ЭТЦО ЦОКЧТЧР, ЩrОЬЬ ЛЮЭЭШЧ “SЬЙrЬ”
. Cooking process starts.
While heating to operational pressure is going, you see dynamic sign on the display. When pressure inside the multicooker reaches working pressure time countdown starts.
When cooking is over you hear sound signal and the multicooker goes automatically to “KННШ ЯЙrХ” mode. The indication of “KННШ ЯЙrХ” button is on.
When cooking is over please unplug the appliance. You must cut pressure inside the multicooker down. Open the steam relief valve. Hot steam goes out and pressure inside becomes lower (pic 7).
CAUTION: Be really careful – steam is extremely hot! When pressure inside the multicooker becomes lower, then there is no outgoing steam from steam release opening, and float valve goes
down to the lowest position. Then open the lid. Never open the lid by force.
Please find recommended by our chef recipes for cooking with different automatic programs in our recipe book.
Cooking suggestions and requirements: Weight of product you see in our recipe book is weight of clean, peeled, defrosted and chopped product. If you want to change our recipe please follow products
proportions, otherwise a dish could be burnt or it could boil away. Please mind to check and correct time or change cooking program in that case. Some other objective reasons could affect cooking time. They
are region where you live, ЩrШНЮМЭ’Ь ЩlКМО ШП ШrТРТЧ, ЬЭШrКРО ЭТЦО КЧН ЭОЦЩОrКЭЮrО ШП ЩrШНЮМЭ. PlОКЬО ЦТЧН ЭСКЭ аrТЭЭОЧ МШШФТЧР ЭТЦО ТЬ rОМШЦЦОЧНОН КЧН may vary. The recipe book is just our recommendation
and advice.
To Next Page
Loading...
