To Next PageTo Next Page
Need help?Do you have a question about the Martindale Electric Metrohm E3640 and is the answer not in the manual?
General| Brand | Martindale Electric |
|---|---|
| Model | Metrohm E3640 |
| Category | Test Equipment |
| Language | English |
Overview of the E3640 AC flash tester, its housing, controls, and operating modes for leakage and breakdown testing.
Details on the VOLTAGE control for adjusting output AC regulator between reset and maximum, and its reset function.
Explanation of the two-way switch for selecting 0-2kV or 0-4kV output voltage range.
Description of the three selectable modes: Breakdown, Trip, and Burn, for various testing scenarios.
Control for setting the trip detector level, which must be exceeded to indicate a fault in the 'DUT'.
Multi-function IEC inlet with a double pole switch, fuse drawer, and 115/230 volt mains power selector.
Explanation of the 'kV ON' and 'Fail' indicator lamps and the associated buzzer.
Description of the Output Voltage kV and Leakage Current mA displays, showing applied voltage and failure values.
Details on the safety socket with an interlock to prevent accidental disconnection of the HV gun probe lead.
Steps for powering the tester, changing fuses, and connecting the mains lead safely.
Step-by-step guide for attaching leads, setting voltage, performing tests, and interpreting results.
