To Next PageTo Next Page
Need help?Do you have a question about the MARTINDALE HPAT600 and is the answer not in the manual?
General| Type | Portable Appliance Tester |
|---|---|
| Display | LCD |
| Weight | 1.5Kg |
| Leakage Test | Yes |
| Run Leakage Test | Yes |
| Substitute Leakage Test | Yes |
| IP Rating | IP40 |
| Appliance Class | Class I and Class II |
Inspect the shipping carton, unit, and accessories for any damage upon receipt.
Overview of the HPAT600 HANDYPAT's features and capabilities.
General warnings and cautions for safe operation and maintenance.
Explanation of safety symbols used in the manual and on the device.
Specific safety precautions to be observed before operating the HPAT600.
Instructions for powering the device and operating its buttons.
Overview of the HPAT600's display, connectors, and symbols.
Configuring test settings, modes, and managing stored test data.
Overview of test modes and essential pre-test checks and setup.
Procedure for testing IEC leads for continuity, insulation, and polarity.
Performing electrical safety tests for Class I and Class II appliances.
Performing specific tests like simulated load, earth continuity, and insulation checks.
Instructions for installing and replacing batteries in the HPAT600.
Procedures for instrument calibration and cleaning.
Guidelines for storing the HPAT600 to maintain its condition.
Details of the product warranty, terms, and limitations of liability.
