EasyManua.ls Logo

MartinLogan Dynamo 400 - SPECIFICATIONS*; System Frequency Response; Woofer Specifications; Amplifier Specifications

MartinLogan Dynamo 400
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
English
sPeCifiCations*
System Frequency Response...................
Woofer ..................................
Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Controls (backplate).........................
Level........................................
Low-Pass Filter (Frequency) .........................
Phase .......................................
Power Mode ..................................
Inputs (Line Level RCA) ...............................
Inputs (Speaker Level) ................................
Input (Impedance)...................................
Power Draw.......................................
Feet .............................................
Weight...........................................
Size (HxWxD, Down-Firing Orientation)
....................
Dynamo 400*
30–200 Hz ± 3 dB. Anechoic in LFE mode.
8” (20.3cm) high-excursion, inverted surround, polypropylene cone in
a stamped steel basket with extended throw driver assembly. Ported.
75 watts (150 watts peak)
Min–Max
35–120Hz, Bypass
0°, 180°
On, Auto
Left and Right/LFE
Left and Right via banana jacks
RCA: 8,300 Ohms
Speaker Level: 2,000 Ohms (red to black)
Typical: 20W, Max: 90W, Idle: 4W, Standby: 0.5W
Rubber
28.5 lbs. each (12.9 kg)
15.2 x 13.3 x 13.8 inches (38.5 x 33.7 x 35.1 cm)
* Specifications are subject to change without notice.