MartinLogan Motion 30 User Manual

7
SPECIFICATIONS*
Frequency Response .....................
Dispersion ............................
Sensitivity.............................
Impedance ............................
Crossover Frequency.....................
High Frequency Driver ...................
Low Frequency Drivers ...................
Cabinet ..............................
Components ...........................
Recommended Amplifier Power.............
Binding Post Inputs ......................
Weight...............................
Dimensions (HxWxD) ....................
MARTINLOGAN MOTION 30
65–25,000 Hz ± 3 dB
80° x 80°
91 dB @ 2.83 volts/ meter
4 Ohms. Compatible with 4, 6 or 8 Ohm rated
amplifiers.
400 & 2,600 Hz
1” x 1.4” (2.6cm x 3.6cm) Folded Motion
Transducer with 5.25” x 1.75” (13.3cm x 4.4cm)
diaphragm.
Two 5.5” (14cm) aluminum cone with cast poly-
mer basket. Non-resonant asymmetrical chamber
format. Rigid structured dust cap to reduce cone
break-up modes.
Ported
Custom air core coil and low DCR steel laminate
inductors. Polyester film capacitors in series and
low DF electrolytic capacitors in parallel. Tweeter
thermal/current protection.
20–200 watts
Custom 5-way tool-less binding posts
18 lbs. (8.2 kg)
6.9” x 16.5” x 10.5” (17.5cm x 42cm x 26.6cm)
*Specifications are subject to change without notice.

MartinLogan Motion 30 Specifications

General

Brand	MartinLogan
Model	Motion 30
Category	Speaker System
Language	English