MARUTI SUZUKI Dzire User Manual

5-23
OTHER CONTROLS AND EQUIPMENT
56RH0-74E
Temperature selector (1)
56RH00534
Turn the temperature selector (1) to adjust
the temperature.
NOTE:
If you turn the temperature selector (1)
until “HI” or “LO” appears on the display,
the climate control system will operate at
maximum heating or cooling. The tempera-
ture of the air from the outlets may change
suddenly while “LO” or “HI” is displayed,
but this is normal.
NOTE:
When you change the unit of temperature
in the information display, the unit of tem-
perature in the air conditioning system will
be changed. Refer to “Information display”
in the “BEFORE DRIVING” section for
details.
Blower speed selector (2)
56RH00535
The blower speed selector (2) is used to
turn on the blower and to select blower
speed.
If “AUTO” switch (8) is pushed, the blower
speed will vary automatically as the cli-
mate control system maintains the
selected temperature.
Air intake selector (3)
56RH00536
Push the air intake selector (3) to change
between the recirculated air and fresh air
mode.
If “AUTO” switch (8) is pushed, the air
intake will vary automatically as the climate
control system maintains the selected tem-
perature.
NOTE:
When the recirculated air mode is
selected, the automatic operation system
is deactivated even if you push “AUTO”
switch (8).
(1)
EXAMPLE
(2)
EXAMPLE
(3)
(a)
(b)
EXAMPLE

MARUTI SUZUKI Dzire Specifications

General

Brand	MARUTI SUZUKI
Model	Dzire
Category	Automobile
Language	English