5
FOR VEHICLES FITTED WITH CNG FUEL SYSTEM
74L90-74E
CNG FILLER VALVE
75TM00007
The CNG filler valve (1) is located on right
outboard side of the vehicle.
75TM00024
CNG filler valve (1) can be accessed by
using spare key (as provided during sale)
to be used for push button start CNG vari-
ants. Keyless entry system transmitter to
be used for other variants. Unlock the CNG
filler valve cover (2) by rotating the key (4)
as shown.
CNG filling automatically gets cut off when
the cylinder pressure becomes equal to
dispenser pressure. After CNG filling,
ensure that the filler valve cover (2) is
closed.
NOTE:
• If the Fuel filler valve cover (2) is kept
open, you will not be able to start the
vehicle.
• Engine will stop if the fuel filler valve
cover (2) is opened in vehicle stationary
condition.
• For proper fitment of CNG filler valve
cover(2), align the D-shape or (3) mark-
ing on filler valve cover with the filler
valve when pushing back the filler valve
cover.Spare key (4) (as provided during
sale) to be used for push button start
CNG variants.Keyless entry system
transmitter to be used for other vari-
ants.Lock the CNG filler valve cover (2)
by rotating the key (4) as shown.
CNG CYLINDER
75TM00009
CNG cylinder (1) is installed in the luggage
compartment.
CNG CYLINDER WARNING LABEL
75TM00010
You may find this label on the CNG cylin-
der.
CAUTION
Do not place any luggage or load
over cylinder as it may damage the
cylinder, pipe, hose, valve etc.
To Next Page
Loading...
