What to do if my Maruyama Trimmer engine will not start?
If your Maruyama Trimmer's engine won't start, here's what you can check: * Ensure the “STOP” switch is in the “ON” position. * Refuel if the fuel tank is empty. * Press the primer bulb until fuel flows through the fuel return line. * If the engine is flooded, use the warm engine starting procedure.
Why won't my Maruyama B42L Trimmer engine start?
If your Maruyama Trimmer engine won't start, there are several potential reasons: * Ensure the "STOP" switch is in the "On" position. * Check the fuel tank and fill it if it's empty. * Push the primer bulb until fuel flows through the fuel return line. * If the engine is flooded, use the warm engine starting procedure.
How to fix a Maruyama Trimmer that will not idle?
If your Maruyama Trimmer will not idle, the idle speed may be set incorrectly. Reset the idle speed.
Why does my Maruyama Trimmer engine lack power or stall when cutting?
If your Maruyama Trimmer engine lacks power or stalls during cutting, the issue could be due to a loose throttle wire (tighten it), a dirty air filter (clean or replace it), or a clogged spark arrester or exhaust port (clean them).
What to do if my Maruyama B42L engine lacks power or stalls when cutting?
If your Maruyama Trimmer engine lacks power or stalls when cutting, consider these possible causes: 1. A loose throttle wire. Tighten it to resolve the issue. 2. A dirty air filter. Clean or replace the air filter. 3. A clogged spark arrester or exhaust port. Clean the spark arrester or exhaust port.
To Next Page
General
