To Next PageTo Next PageWhy won't my Maruyama Trimmer engine start?
If your Maruyama Trimmer engine won't start, here are a few things to check: * Ensure the STOP switch is in the 'on' position. * Make sure the fuel tank isn't empty; if it is, fill it. * If the engine is flooded, use the warm engine starting procedure.
What to do if Maruyama BC4320H-RS engine lacks power or stalls when cutting?
If your Maruyama Trimmer engine lacks power or stalls when cutting, check if the throttle wire has come loose and tighten it. Also, ensure that the air filter is clean; if it's dirty, clean or replace it.
Essential safety practices for the user to prevent injury.
Guidelines for safe handling, storage, and use of fuel.
Step-by-step guide for connecting the engine and drive shaft.
General
