Need help?Do you have a question about the Maruyama BC2300 and is the answer not in the manual?
Key safety rules for safe equipment operation.
Precautions for safe use of trimmer and brushcutter.
Safety guidelines for handling fuel and oil mixtures.
Safe operating procedures for trimmers and brushcutters.
Connect engine and drive shaft components.
Install loop handle for trimmer models.
Install bullhorn handle for brushcutter models.
Wire the stop switch to the engine.
Connect throttle cable to carburetor.
Attach safety shield for trimmer head.
Fit protective shield for brushcutter blades.
Attach trimmer head to the unit.
Securely mount brushcutter blade.
Connect operator's harness strap.
Fuel and oil requirements and safety.
Correct oil type for two-cycle engine.
Appropriate gasoline and octane rating.
Warning against using certain fuel additives.
Properly mix gasoline and oil.
Chart of oil quantities for gasoline amounts.
Step-by-step guide for mixing fuel and oil.
Pre-start checks and engine preparation.
Steps for starting a cold engine.
Instructions for restarting a warm engine.
Safely shut down the engine.
Adjust engine's idle speed.
Correct posture for string trimmer operation.
Effective cutting with trimmer line.
Hold and use trimmer head for cutting.
Cut vegetation at ground level.
Cut grass with trimmer line.
Correct posture for brushcutter operation.
Swing brushcutter to avoid kick-back.
Select, check, and maintain brushcutter blades.
Clean and maintain air filter.
Clean air filter assembly.
Fuel filter maintenance and replacement.
Spark plug maintenance and replacement.
Clean cylinder cooling fins for engine cooling.
Inspect and clean spark arrester screen.
Clean and maintain exhaust muffler.
Lubricate the gearcase.
Sharpen four-tooth brushcutter blade.
Sharpen eight-tooth brushcutter blade.
Sharpen 80-tooth brushcutter blade.
To Next Page
General
